Celebrating 21 Years of Automotive Paint & Supplies

Mini Cart

TCI Urethane Clear Coat – 6050

(1 customer review)

$145.52

Product price
Additional options total:
Order total:

Description

Included with purchase
6050 | TCI Urethane Clearcoat – 4.1 VOC (1 Gallon/3.785 Liters)
602 | TCI Urethane Activator – Medium (1 Quart/.946 Liters)TCI Urethane Clear Coat – 6050 is a medium solids clearcoat that is easy to spray providing excellent flow out, gloss, and DOI. TCI Urethane Clear Coat – 6050 can be used for partial or complete paint jobs in need of a high quality, durable finish and is compatible with virtually any base coat. Offers extremely fast dry times, extremely high gloss, very easy buffing, ease of application and is National rule compliant. UV sunscreens offer extreme resistance to fading.PRODUCT DESCRIPTION :
TCI Urethane Clear Coat – 6050 is a two component polyurethane clearcoat formulated to offer refinishers ease of application, great flow and leveling, superior gloss and excellent distinctness of image in a 4.1 VOC conventional solid polyurethane clearcoat.TCI Urethane Clear Coat – 6050 is a fast drying and easy to use urethane clear designed with the fast paced shop in mind. TCI Urethane Clear Coat – 6050 can be applied over virtually any single stage or base coat auto paint. (See product technical data sheets) TCI Urethane Clear Coat – 6050 offers flash times of just 3-5 minutes with superior gloss and no die back.

 

TCI 6050 – Technical Information Sheet

DESCRIPTION: 6050 Universal Clear 
A 4:1 mixing ratio Clear. It provides a high quality finish with excellent gloss, leveling, and flow characteristics. An excellent value without sacrificing quality.

INSTRUCTIONS:

Applying Basecoat

  • Apply in accordance with manufacturer’s instructions
  • Permit the basecoat to fully dry prior to applying clear
  • Remove surface contaminants with tack cloth prior to applying clear

Mixing & Applying Clearcoat

  • Thoroughly mix four parts of 6050 with one part of 601 series hardener
  • Set gun pressures according to Gun Set-up directions
  • Apply one medium coat followed by one full wet coat allowing 3 to 5 minute flash time between coats
  • For best results, an additional full wet coat may be applied following a 5 minute flash time
  • Keep spray gun 6 – 10 inches from surface, adjust speed of travel to apply wet coat with each pass, overlapping approximately 50%
    Note: air may be entrapped if the distance between the gun and surface is too close or gun travel is too slow

Buffing

  • Force dry – follow Bake directions before wet sanding/buffing.
  • Air dry – for best results cure overnight before wet sanding/buffing.
  • 6050 can be wet sanded in as little as four hours at 75º F
    Note: cure time may vary with film thickness and temperature

GENERAL:

Appearance -Clear Liquid
Viscosity, RTS – 23 – 24 seconds #2 Zahn
Shelf Life -One Year (unopened)
RTS VOC -4.2 lb/gal (500 g/L)
RTS Solids by Weight – 33%
Pot Life -3 hrs @ 75˚ F
Product Size
– Clearcoat – 6050 – Gallon or quart can
– Activator – 601 Fast – Quart or half pint can
– Activator – 602 Medium – Quart or half pint can
– Activator – 603 Slow – Quart or half pint can

BASECOATS/SUBSTRATES

6050 Clearcoat is compatible with most high quality basecoats.
Refer to basecoat manufacturing technical data sheets.
(If not sure of compatibility, test first in an inconspicuous area)
Recommended substrate temperature: 70º – 80º F (21º – 27º C)

GUN SET-UPTIPAIR PRESSURE
Conventional1.3 – 1.4 mm40 – 50 psi (at gun)
HVLP1.2 – 1.3 mm8 – 10 psi (at aircap)

FLASH & DRY TIMES :
 Flash Time between coats at 75ºF    3 to 5 minutes
– Dust Free Time at 75ºF                 30 minutes

GUN CLEAN-UP:
– 
Clean equipment with a high quality lacquer thinner immediately after spraying

BAKE: 
 – Allow ten minute flash time before force drying
– Bake for 30 minutes at 140º F
– Cool for one hour after force drying before wet sanding

RECOATING:
– 
Recoat after 12 hours air dry at 75º F
or
– Recoat after 2 hours cool down after force drying

GUN CLEAN-UP:
– 
Clean equipment with a high quality lacquer thinner immediately after spraying

ADDITIVES:
FISH EYE – The use of fish eye eliminator discouraged because it can impact the flow and leveling of the clearcoat
ACCELERATOR – The use of additional catalysts is not recommended as it can cause solvent popping and/or loss of gloss

TECHNICAL INFO: For additional technical information call (800-824-4999)

SAFETY DATA: Refer to MSDS for 6050, 601, 602, 603

FOR INDUSTRIAL USE ONLY.

TO PROTECT AGAINST HARMFUL VAPOR & SPRAY WEAR A POSITIVE – PRESSURE SUPPLIED AIR RESPIRATOR (NIOSH APPROVED), EYEPROTECTION, GLOVES AND PROTECTIVE CLOTHING WHILE MIXING AND SPRAYING. FOLLOW MSDS FOR APPROPRIATE SAFETY AND HEALTH INSTRUCTIONS

DISCLAIMER: The information contained on this Technical Data Sheet is intended to assist you in product application. It is based on knowledge of general industry use, experience & research. Since conditions of storage, handling, and product use are not under our control, buyers must assume responsibility for suitability of the product for their specific purposes.


Additional information

Weight12 lbs
Dimensions6.5 × 6.5 × 9 in

1 review for TCI Urethane Clear Coat – 6050

  1. Anthony Storey (verified owner)

    This clear coat sprays easily, buffs out nicely.. looks awesome. I would recommend it.

Only logged in customers who have purchased this product may leave a review.