Celebrating 21 Years of Automotive Paint & Supplies

Mini Cart

Sold Out

TCI Premium Lacquer Primer – Gray

$48.00

Out of stock

Item Description

Hi-Solids Acrylic Lacquer Primer

PRODUCT DESCRIPTION:
TCI Hi-Solids Lacquer Primer is a premium formula producing a fast drying and durable primer. Dries quickly, sands easily. Fills sand scratches and imperfections prior to topcoat application quickly. This primer can be topcoated with any automotive paint system..

FEATURES:
• Excellent Adhesion Characteristics
• Hi-Build, Superior Holdout
• Fast Drying
• Easy Sanding Properties
• Can Be Top coated With Any Automotive Paint System
• Indefinite Pot life!

Technical Data

TCI 4181- Technical Information Sheet

DESCRIPTION: 4181 Lacquer Primer
4181 is a high quality one-component primer surfacer. 4181 dries quickly and has good sanding and filling properties. It may be used under acrylic lacquers, acrylic enamels, alkyd enamels, urethane enamels and basecoat/clearcoat systems.

INSTRUCTIONS:

  • Sand original finish with medium grit sandpaper
  • Clean all area with wax and grease remover
  • Surface should be clean and dry before applying product
  • Spray two or three medium coats of 4181, allowing each coat to flash to a dull appearance before applying the next coat.
  • For best results force dry or allow to air dry for one hour before sanding
  • 4181 can be block or machine sanded with P320 or P400, or wet sanded with P400 or P500 grit before applying topcoat

GENERAL:

Appearance -Gray Liquid
Viscosity -Full Bodied
Shelf Life -One Year (unopened)
VOC -4.5 lb/gal (540 g/L)
Pot Life -30 – 60 Minutes @ 75˚ F
Product size -One gallon or quart cans

PRODUCT MIXING:

  • Mix one part 4181 with 1½ parts by volume lacquer thinner or urethane reducer.
  • A reduction range of between 1:1 and 1:2 may be used depending on the desired viscosity and build.

SUBSTRATES:

  •  Coat large bare metal, steel & aluminum areas with proper self-etching sealer
  •  Recommended substrate temperatures: 50˚ F – 100˚ F.
GUN SET-UP TIP AIR PRESSURE
Siphon Feed 1.8 – 2.0 mm 30 – 40 psi
Gravity Feed 1.6 – 2.0 mm 25 – 40 psi
HVLP (gravity) 1.6 – 2.0 mm 6 – 10 psi


GUN CLEAN-UP: 
Clean equipment with a high quality lacquer thinner immediately after spraying

TECHNICAL INFO: For additional technical information call (800-824-4999)

SAFETY DATA: Refer to SDS for 4181

FOR INDUSTRIAL USE ONLY.

TO PROTECT AGAINST HARMFUL VAPOR & SPRAY WEAR A POSITIVE – PRESSURE SUPPLIED AIR RESPIRATOR (NIOSH APPROVED), EYEPROTECTION, GLOVES AND PROTECTIVE CLOTHING WHILE MIXING AND SPRAYING. FOLLOW SDS FOR APPROPRIATE SAFETY AND HEALTH INSTRUCTIONS

DISCLAIMER: The information contained on this Technical Data Sheet is intended to assist you in product application. It is based on knowledge of general industry use, experience & research. Since conditions of storage, handling, and product use are not under our control, buyers must assume responsibility for suitability of the product for their specific purposes.

 

Out of stock

***Always read, understand, and follow the product information and instructions provided. Product use is void where prohibited, and is intended for use only by professionals or under a professional's supervision. PaintForCars.com and Trinity 1945 Inc. are not responsible for adverse results while using our products. Liability, if any, shall not exceed a refund of the purchase price.