TCI 2K High Build Urethane Primer Surfacer
4200 | Gray – 4.4 VOC (1 Gallon/3.785 Liters)
Included with purchase
422 | TCI Activator – 4.4 VOC
TCI Premium Gray 2K High Build Urethane Primer is formulated for maximum holdout and minimal sand-scratch swelling. Dries fast and builds quickly.
Mixing Ratio: 4:1:1
Catalyst: #422 Activator
1.5mm – 2.2mmm for Conventional and HVLP guns
35-45 psi at the gun for Conventional gun
28-35 psi at the gun for HVLP gun
Film Build : 3.0 mils wet
Pot Life: 3 hours
VOC: 4.4 lbs/gallon (RTS)
TCI 4200- Technical Information Sheet
DESCRIPTION: 4200 Premium 2K Urethane Primer
4200 is a two component acrylic urethane primer designed to provide ease of sanding as well as exceptional adhesion, film build, and cure time.
Appearance -Gray Liquid
Viscosity -Full Bodied
Shelf Life -One Year (unopened)
VOC -3.74 lb/gal (448 g/L)
Pot Life -30 – 60 Minutes @ 75˚ F
– Primer – 4200 -One gallon or quart cans
– Activator – 422 – Cone top quart or half pint cans
|GUN SET-UP||TIP||AIR PRESSURE|
|Siphon Feed||1.8 – 2.0 mm||30 – 40 psi|
|Gravity Feed||1.6 – 2.0 mm||25 – 40 psi|
|HVLP (gravity)||1.6 – 2.0 mm||6 – 10 psi|
GUN CLEAN-UP: Clean equipment with a high quality lacquer thinner immediately after spraying
TECHNICAL INFO: For additional technical information call (800-824-4999)
SAFETY DATA: Refer to SDS for 4200 and 422
FOR INDUSTRIAL USE ONLY.
TO PROTECT AGAINST HARMFUL VAPOR & SPRAY WEAR A POSITIVE – PRESSURE SUPPLIED AIR RESPIRATOR (NIOSH APPROVED), EYEPROTECTION, GLOVES AND PROTECTIVE CLOTHING WHILE MIXING AND SPRAYING. FOLLOW SDS FOR APPROPRIATE SAFETY AND HEALTH INSTRUCTIONS
DISCLAIMER: The information contained on this Technical Data Sheet is intended to assist you in product application. It is based on knowledge of general industry use, experience & research. Since conditions of storage, handling, and product use are not under our control,buyers must assume responsibility for suitability of the product for their specific purposes.