Celebrating 21 Years of Automotive Paint & Supplies

Mini Cart

Premium Gold Bodyfiller

$28.00

Product price:
Additional options total:
Order total:

Item Description

  • 5064 | Premium Gold Bodyfiller (0.8 Gallons)DESCRIPTION:

    5 STAR Autobody Products – Premium Gold Body Filler is manufactured with the latest premium resin technology for effortless sanding. This same technology provides superior adhesion to all types of metals including galvanized, bare steel and aluminum. Easy to spread, #5064 is also clog free and tack free. Blue cream hardener is included.

    PRODUCT USES:

    Use for filling and repair of bodywork up to 1/4″, such as dents, dings, scratches, rust, hail damage and small holes.

    TYPICAL SUBSTRATES:

    Steel
    Aluminum
    Fiberglass
    Body Filler
    Wood
    2K Primers
    Aged, sanded OEM Topcoats
    Galvanized and other zinc-coated steel
    SMC – can be used for cosmetic repairs. For structural repairs prone to high degrees of stress and flexibility, use an SMC repair product.

Technical Data

5 STAR AUTOBODY PRODUCTS
TECHNICAL DATA INFORMATION
DATED: JULY 2012

PRODUCT NUMBER – DESCRIPTION
#5062 – LIGHTWEIGHT BODYFILLER GALLON 4/CS

DESCRIPTION:
5 STAR AUTOBODY PRODUCTS – Lightweight Filler is a creamy body filler with a smooth
texture that is easy to spread and sands to a fine featheredge. The tack free, clog free and nonsag
formula is perfect for repairing vertical surfaces.

PRODUCT USES:
Use for filling and repair of bodywork up to ¼”, such as dents, dings, scratches, rust, hail damage
and small holes.

TYPICAL SUBSTRATES:
Steel
Aluminum
Fiberglass
Body Filler
Wood
2K Primers
Aged, sanded OEM Topcoats
Galvanized and other zinc-coated steel

SMC – can be used for cosmetic repairs. For structural repairs prone to high degrees of stress
and flexibility, use an SMC repair product.

SURFACE PREPARATION:
1. Clean surface. Remove all dirt, oil, grease and wax with a cleaning solvent like Wax &
Grease Remover.
2. Make sure surface is dry before repairing.
3. Use 40-80 grit disc to featheredge paint for good mechanical adhesion.

MIXING:
For best results, bring filler and provided hardener to room temperature (minimum temperature
75ºF). Stir product before dispensing with a bottom to top motion. Knead hardener tube before
use. Place a 4” diameter puddle of filler on a clean mixing surface (we recommend a nonabsorbent
plastic mixing board) and add a ribbon of cream hardener from edge to edge across
the center of the filler puddle (puddles larger than 4” will require additional hardener); or measure
hardener at 2% by weight of filler – a 50 to 1 ratio. Mix thoroughly with a plastic spreader, using a
folding motion, until uniform color is achieved. At room temperature (75ºF) approximate setting
time is 3 – 5 minutes.

APPLICATION:
1. Using a plastic spreader, apply a thin layer of filler to surface, using firm pressure for
maximum adhesion.
2. Apply additional layers, if necessary, building up damaged area higher than surrounding
metal surface to allow for sanding of filler.
3. IMPORTANT! DO NOT RETURN UNUSED MIXTURE TO CAN AS IT WILL HARDEN THE
REMAINING CONTENTS.

FINISHING:
1. When material has cured, in approximately 15 minutes, sand with a 80-120 grit sandpaper.
2. Finish sand with 180-240 grit.

TOPCOATING:
May be topcoated with polyester, 2K urethane or 1K primer. Refer to paint manufacturer’s
instructions for topcoat application.

TECHNICAL INFORMATION:

Appearance as Packaged: Off-White
VOC Packaged: 215 g/l – Applied: 0.8 g/l
Weight Per Gallon (Density): 9.7 pounds (Average)
Maximum Recommended Thickness (sanded):  ¼”
Viscosity @ 77°F: 96,000 cps (Average)
Gel Time @ 77°F: 3.0 – 5.0 minutes
Shore “D” Hardness Values @ 24 hours: 50-60
Sanding Time @ 77o F: 15-20 minutes
Maximum Heat: 200ºF for 30 minutes
Catalyst Required: Benzoyl Peroxide
Catalyzation Ratio: 2% by weight
Exotherm Temperture: 200ºF (Average)
Tack Free Time: 10 – 15 minutes

HEALTH & SAFETY:
Read all warnings, first aid and safety for all components before using. Keep out of reach of
children and animals. Protect hands with impervious rubber gloves. Wear face, skin and eye
protection. When sanding, we recommend the use of a respiratory covering device to protect from
dust (MSA mask P/N 459029 with MSA cartridge 464029 or equivalent). When using power
equipment, refer to power tool manufacturer’s recommendations for safety equipment. 5 STAR
AUTOBODY PRODUCTS are for industrial use by trained professionals only.

Emergency Medical or Spill Control Information:
In U.S. and Canada call CHEMTREC at 1-800-424-9300

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

***Always read, understand, and follow the product information and instructions provided. Product use is void where prohibited, and is intended for use only by professionals or under a professional's supervision. PaintForCars.com and Trinity 1945 Inc. are not responsible for adverse results while using our products. Liability, if any, shall not exceed a refund of the purchase price.