Celebrating 21 Years of Automotive Paint & Supplies

Mini Cart

Sold Out

XTREME “Flat Finish” Klearkote 4.4 VOC

This product is currently out of stock and unavailable.

Description

Items Included

5165 | Original Flat Finish Klearkote – 4.4 VOC (1 Gallon/3.785 Liters)
5187 | Original Hardener Medium – 4.4 VOC(1 Quart/.946 Liters)

5 STAR Xtreme’s #5165 Original Flat Finish Klearkote is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish.

TECH DATA:
Mixing Ratio: 6 parts #5165: 1 part #5187
Viscosity (RTS): 17-19 seconds #2 Zahn
Volume Solids (RTS): 28%
Film Build: 0.8 – 1.0 mils per full wet coat
Coverage: 449 sq. ft. per gallon @ 1 dry mil
Disposal/Safety: see MSDS for this product
Humidity Resistance: Excellent
Salt Spray Resistance Excellent
Pot Life: 4-5 hours


5 STAR AUTOBODY PRODUCTS
TECHNICAL DATA INFORMATION
DATED: JULY 2015

PRODUCT NUMBER – DESCRIPTION
#5165 – ORIGINAL FLAT FINISH KLEARKOTE 4.4 VOC  

PRODUCT DESCRIPTION: 
5 STAR XTREME #5165 “FLAT FINISH” KLEAR is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish.

PRODUCTS:
• 5165-1 Original Flat Finish 4.4 VOC Klearkote, Gallon
• 5165-4 Original Flat Finish 4.4 VOC Klearkote, Quart
• 5187-4 Original 4.4 VOC Medium Activator, Quart
• 5187-16 Original 4.4 VOC Medium Activator, Half Pint

BASECOAT: 
Compatible with most paint manufacturers’ solvent and waterborne systems. Apply basecoat as per manufacturer’s mixing and application instructions. Allow sufficient flash times before applying #5165. Inadequate flash time will affect the performance of the clear.

MIXING RATIO (6:1): 
IMPORTANT: STIR & SHAKE WELL BEFORE POURING 
Mix 6 parts #5165 FLAT FINISH Klearkote to 1 part #5187 Activator.

APPLICATION: 
Apply 2-3 even medium wet coats with 75% overlap at 40-50 psi or (6-10 psi when using HVLP at the gun), allowing a 10-15 minute flash between coats.
NOTE: SPRAY A TEST PANEL BEFORE CLEARCOATING YOUR PROJECT 

DRY TIMES AT 77°F: 
Flash Time 10-15 mins
DUST FREE 15-20 Minutes
TACK FREE 45 Minutes
TO DELIVER 16-24 Hours (air dry)

FORCE DRYING:
BAKE TIME @ 140° F 30 Minutes

RECOATING:
#5165 may be recoated after a 24 Hour dry at 77° F, or upon cool down after force drying at 140° F for 30 minutes.

POT LIFE: 
Pot life will be about 4-5 hours at 77°F.

CLEAN UP: 
Clean equipment immediately using 5 STAR #5700 Premium Lacquer Thinner or #5685 Urethane Reducer.

TECH DATA: 
Mixing Ratio: 6 parts #5165: 1 part #5187
Viscosity (RTS): 17-19 seconds #2 Zahn
Volume Solids (RTS): 28%
Film Build: 0.8 – 1.0 mils per full wet coat
Coverage: 449 sq. ft. per gallon @ 1 dry mil
Disposal/Safety: see MSDS for this product.
Humidity Resistance: Excellent.
Salt Spray Resistance: Excellent

FIRST AID: 
In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. For skin: Wash thoroughly with water. If difficulty in breathing is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately. See Material Safety Data Sheet.

SAFETY INFORMATION – FOR INDUSTRY USE ONLY 
Danger: Vapor harmful. May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Harmful if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame. Vapors may cause flash fire. Do not smoke. Extinguish all flames and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist. Do not get in eyes, on skin or clothing. Wash thoroughly after handling. Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public.

KEEP OUT OF REACH OF CHILDREN. 

Additional information

Weight12 lbs
Dimensions9 × 10.5 × 7.5 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

This product is currently out of stock and unavailable.