What is included
8004 | 5 Star Xtreme Urethane Fleet White 2.8 VOC (1 Gallon/3.785 Liters)
8040 | 5 Star Xtreme High-Performance Urethane Paint Catalyst (1 Quart/.946 Liters)
5655 | Flow Star Medium Urethane Reducer (1 Quart/.946 Liters)
3 Sticks, 3 Strainers, and 1 Dust Mask
Description
5 STAR XTREME #8000 Series 2.8 VOC Acrylic Urethane Colors are high solids, high gloss, low VOC coatings intended for use as a protective maintenance coating for automotive and industrial applications, surfaces exposed to humidity, chemicals, and corrosive elements.
Common Uses – Vehicles, Implements & Trailers, Industrial Plants & Mills, Chemical Processing Plants, Refineries, Storage Tanks & Piping, Buildings, Structural Steel & RoofDecks, Marine Vessels & Offshore Structures.
Advantages – Our Urethane System may be applied direct to metal and provides excellent exposure protection to severe industrial, commercial and marine environments
to maintain its exceptional gloss and color retention in the harshest exposures.
5 STAR XTREME AUTOBODY PRODUCTS
TECHNICAL DATA INFORMATION
DATED: AUGUST 2012_REVISED
PRODUCT DESCRIPTION:
5 STAR XTREME #8000 Series 2.8 VOC Acrylic Urethane Colors are high solids, high gloss, low VOC coatings intended for use as a protective maintenance coating for automotive and industrial applications, surfaces exposed to humidity, chemicals, and corrosive elements.
PLEASE SHAKE AND STIR ALL PRODUCTS THOROUGHLY
#8000 SERIES CUSTOM COLOR/CATALYST:
HIGH-PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC – GALLON
#8000-01 Gloss Black
#8001-01 Hot Rod Black
#8002-01 Brilliant Black Pearl
#8003-01 Gloss White
#8004-01 Fleet White
#8005-01 Pure White
#8007-01 Oxford White
#8008-01 Charcoal Mist Metallic
#8009-01 Galaxy Silver
#8010-01 Viper Red
#8011-01 Swift Red
#8012-01 Candy Apple Red
#8013-01 International Harvester Red
#8014-01 Allis Chalmers Orange
#8015-01 New Cat Yellow
#8016-01 School Bus Yellow
#8017-01 John Deere Yellow
#8018-01 John Deere Green
#8019-01 Ford Blue
HIGH-PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC -QUART
#8030-04 Premium Low VOC Reducer
#8040-04 2.8 VOC High-Performance Urethane Paint Catalyst
DIRECT TO METAL ADHESION
NOTE: Performance is better when using DTM Primer under #8000 series paint.
POT LIFE
Pot life will be about 3-5 hours at 77° F.
MIXING DIRECTIONS (4:1:1):
2.8 VOC
4 PARTS #8000 Series Single Stage
1 PART #8040 Catalyst
1 PART #8030 Reducer or quality grade Low VOC urethane reducer
SURFACE PREPARATION:
1. Wash area thoroughly with soap and water to remove contaminants that solvent-based cleaners cannot remove effectively. 2. Clean area with Wax and Grease Remover. 3. Use a tack cloth to remove any surface contaminants that may have settled on the repaired areas prior to paint application. 4. Apply #8000 series High-Performance Urethane Single Stage Color.
APPLICATION DIRECTIONS:
Adjust air pressure to 40-50 psi at the gun for gravity, siphon feed guns or HVLP uses 6-10 psi at the air cap. Apply 2-3 medium coats (maximum 2 mils wet per coat) or until hiding is achieved. Allow a 15-20 minute flash time between coats and before force drying.
DRY TIMES AT 77°F:
FLASH TIME 15-20 MINUTES
TO DELIVER 16-24 HOURS
FORCE DRYING AT 140°F:
PURGE TIME 15 MINUTES
BAKE TIME AT 140°F 40 MINUTES
RECOATING:
2.8 VOC XTREME #8000 Urethane Single Stage Color may be recoated after 16-24 hours at 77° F. After 16-24 hours it must be lightly sanded/scuffed before additional color or clear coat may be applied.
ACCELERATOR & FISHEYE ELIMINATOR:
Accelerator and/or Fisheye Eliminator is not recommended for use in this product.
CLEAN-UP:
Clean spray equipment immediately after use with 5 STAR XTREME Gun Wash, or a high-quality lacquer thinner, or compliant solvent depending on area regulations.
TECHNICAL DATA:
Color: Various
Catalyst: #8040
Low VOC Reducer: #8030
Mixing Ratio (2.8 VOC): 4:1:1
Weight Solids (RTS): 52 – 70%
Viscosity #2 Zahn (RTS): ____________________ 18 – 28 seconds #2 Zahn
Pot Life: 3-5 hours
Film Build per coat: _________________________ 1.0-2.0 mils per full wet coat
Coverage: 850 sq.ft. per gallon @ 1 dry mil
Disposal/Safety: ____________________________ See MSDS for this product
Weight | 14 lbs |
---|---|
Dimensions | 14 × 6.5 × 10.5 in |
Only logged in customers who have purchased this product may leave a review.
Out of stock
Reviews
There are no reviews yet.