Here are several important tips for achieving excellent results - safely:
1. Always wear protective gear while painting.
Paint and the other materials you will use in giving your car a new coat of paint may have toxic materials that could enter your system. It is not just your clothes that need protection during a paint job, but also your health. So, for your safety, you should get yourself a paint suit, a respirator, goggles and gloves.
2. Make sure your paint booth is well-lighted, clean and has the right temperature.
Keep your spray booth or the area where you will be painting your car clean from dust and dirt at all times. It should also be well-lighted so you can see what you are doing clearly. It is imperative to check on the temperature of your work area as well. This will affect not just the amount of paint and thinner you should use, but also the time it takes for the paint to dry between coats as well as the ultimate results.
3. Prep all your car panels or your vehicle before you start painting.
Cleanliness is a very important in any painting endeavor. You should clean your vehicle or all your car panels with soap and water as well as wax and grease remover to get rid of any debris, dust or dirt that could block your spray gun or mar your new paint. You can also use a tack rag to wipe the surface of your panels or your car. Compressed air is needed to clean out complex car parts like the deck lid though. This is the only way you can get every last speck of dirt and drop of water.
You also need to prime and block-sand your vehicle or car panels with the use of a 600-grit paper before you can start painting them.
4. Get ready with all the materials needed to make your paint job easier and to protect all the stuff that doesn’t need paint on them.
You will need a specialized table to hold the car parts in place during the painting process. It is best if you will cover this table with masking paper so that it won’t get a layer of paint that it doesn’t need. You can also get such things as plugs to ensure that threaded inserts are kept clean while you are painting. These plugs will also make sure that these inserts won’t get any primer or paint in them.
5. Stir paint up while you are giving your car a fresh coating.
When you are already in the process painting your car, never forget to stir up the paint. Remember that as time passes, a lot of the product you are using will get to the bottom of the spray gun’s tank. So, to make sure that your paint’s viscosity is maintained, stir it up often and thoroughly.
6. Do not forget the paint filters.
You should also see to it that the paint is filtered as it goes into the reservoir of your paint gun. Although paint filters are standardized, you should take note of the type of gun you are using for your paint job. It is preferred that you use a high-volume, low-pressure spray gun though for higher efficiency.
7. Ask a paint professional which nozzle you should use for painting project.
The inner fittings of the nozzles of spray guns are adjustable. They are changed according to the type of paint you are using for a project. To ensure that you are using the right kind, ask your paint supplier or a paint professional which is the right one suited for the paint you prefer.
8. Maintain proper distance between your vehicle or car panel and your spray gun.
Make sure that your spray gun is as far as 18 inches or farther from your vehicle or your car panel while you are painting. You can test the distance between your panel or your vehicle and your gun before you start painting to make sure that everything is what you wanted.
As soon as you notice your spray gun spitting, you should stop immediately. Clean your gun’s nozzle with acetone before you start painting again. You should also make sure never to touch your gun to your freshly painted vehicle or panel. Failure to do so will require for you to go through the tedious process of letting the wet paint dry and sanding out the marred area before you can repair it.
9. If in doubt, always ask questions. Remember that asking questions is never bad. If you are not sure about something that has got to do with your paint job, you should consult with paint professionals. This will prevent you from making mistakes with your paint job and will save you the time and money in possibly doing things all over again.