Automotive Paint and Supplies
848-448-8186
autopaint@paintforcars.com

XTREME DTM High Build Primer

XTREME DTM High Build Primer
    Photos are intended for general color reference only. Refer to Color Chart for actual color samples.
     


    Return To Technical Data Links

    5 STAR XTREME AUTOBODY PRODUCTS

    TECHNICAL DATA INFORMATION

    DATED: JULY 2012

     

    PRODUCT NUMBER DESCRIPTION

    #5425 – HIGH BUILD 2K DIRECT TO METAL PRIMER/FILLER/SEALER (GRAY) 2.1 VOC

    DESCRIPTION:

    #5425 is formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding.

    PRODUCTS

    • 5425-1

    DTM Primer (GRAY) 2.1 VOC - Gallon

    • 5425-4

    DTM Primer (GRAY) 2.1 VOC - Quart

    • 5426-4

    DTM Primer Activator 2.1 VOC - Quart

    • 5426-16

    DTM Primer Activator 2.1 VOC - Half Pint

     

     

    ADDITIONAL OPTIONS:

    • 5423-1

    DTM Primer (WHITE) 2.1 VOC - Gallon

    • 5423-4

    DTM Primer (WHITE) 2.1 VOC - Quart

    • 5424-1

    DTM Primer (BLACK) 2.1 VOC - Gallon

    • 5424-4

    DTM Primer (BLACK) 2.1 VOC - Quart

    SURFACE PREPARATION:

    Clean all areas to be primed with compliant Wax & Grease Remover to remove all dirt, wax, grease, and other contaminants. Featheredge and sand the original finish. Surface must be clean and dry. Note: Rust and oxidation must be removed prior to applying primer by sanding, grinding, or sand blasting.

    MIXING DIRECTIONS:

    HIGH BUILD PRIMER FILLER

    • 4 PARTS #5425 DTM Primer

    • 1 PART #5426 Activator

    REGULAR BUILD PRIMER FILLER

    • 4 PARTS #5425 DTM Primer

    • 1 PART #5426 Activator

    • 1 PART Urethane Reducer - Nat’l Rule

       Exempt Reducer for compliancy

    PRIMER SEALER

    • 4 PARTS #5425 DTM Primer

    • 1 PART #5426 Activator

    • 2 PARTS Urethane Reducer - Nat’l Rule

       Exempt Reducer for compliancy

    APPLICATION:

    Spray one to three medium wet coats allowing 10-20 minutes flash between coats.

    POT LIFE:

    2-3 hours @ 77° F

    ADDITIVES:

    ACCELERATOR: N/A

    FISHEYE: N/A

    FLEX ADDITIVE: Not required

    Note: Do not spray when surface temperature is below 50°F

    CLEAN UP:

    Clean spray equipment immediately after use with 5 STAR XTREME #5414 Virgin Wash Thinner.

    SUBSTRATES:

    • Properly cleaned and sanded aluminum, steel, galvanized steel or sand blasted steel

    • Properly cleaned and sanded fiberglass, SMC, E-Coat and OEM finish.

    GUN SETUPS:

    CONVENTIONAL

    AIR PRESSURES CONVENTIONAL @ Gun

    PANEL

    OVERALL

    Gravity Feed 1.6 mm - 2.0 mm

    Gravity Feed

    30-35 psi

    40-45 psi

    Siphon Feed 1.8 mm - 2.0 mm

    Siphon Feed

    30-40 psi

    45-55 psi

    HVLP 1.6 mm - 2.0 mm

    HVLP @ Cap

    6-8 psi

    8-10 psi

    FLASH/DRY TIMES:

    AIR DRY @ 77°F

    Flash between coats 10-20 Minutes

    To Sand 60-90 Minutes

    To Topcoat 30 Minutes*

    PLEASE NOTE:

    Reduction may accelerate flash times.

    *To Topcoat without sanding - 24 hrs max

    TECH DATA:

    Volume Solids: 45.7% (RTS)

    VOC Coating: 2.73 lbs. per gallon

    Pot Life: 2-3 Hours @ 77°F

    VOC Material: 2.06 lbs. per gallon

    Disposal/Safety: See MSDS for this product

    FIRST AID:

    In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. For skin: Wash thoroughly with water. If difficulty in breathing is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately. See Material Safety Data Sheet.

    SAFETY INFORMATION - FOR INDUSTRY USE ONLY

    Danger: Vapor harmful.May affect the brain or nervous system causing dizziness, headache, or nausea.May cause eye, skin, nose, and throat irritation.Harmful if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame. Vapors may cause flash fire.Do not smoke. Extinguish all flames and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist.Do not get in eyes, on skin or clothing.Wash thoroughly after handling. Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN. ABI- Autobody Brands International a division of IAMG - International Autobody Marketing Group - Scottsdale,AZ - www.autobodybrands.com

     

    Best Price Online

    $120.00
    Selecet Size:
    Select Color:

    Shipping/Return Policy
    Contact Us

    "PaintForCars ships quick and delivers what they advertise."
    - Steedjohnd from eBay
    Flammable products can only ship by ground, and
    only within the Continental US. International,
    AK, HI, Next Day and 2nd Day, delivery are not available.

    Related Products

     
    Paintforcars Starfire Acrylic Urethane Reducer medium speed 1 quart
    MAXX SOLV Wax & Grease Remover
    Flow Star Urethane Reducers
    Gerson Blue Resperator
    5 Star X-treme Hand Cleaner


     


    © 1998-2013 PaintForCars.com