XTREME "Flat Finish" Klearkote 4.4 VOC
Items Included5165 | Original Flat Finish Klearkote - 4.4 VOC (1 Gallon/3.785 Liters)
5187 | Original Hardener Medium - 4.4 VOC(1 Quart/.946 Liters)
5 STAR Xtreme's #5165 Original Flat Finish Klearkote is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish.
Mixing Ratio: 6 parts #5165: 1 part #5187
Viscosity (RTS): 17-19 seconds #2 Zahn
Volume Solids (RTS): 28%
Film Build: 0.8 - 1.0 mils per full wet coat
Coverage: 449 sq. ft. per gallon @ 1 dry mil
Disposal/Safety: see MSDS for this product
Humidity Resistance: Excellent
Salt Spray Resistance Excellent
Pot Life: 4-5 hours
#5165 XTREME “FLAT FINISH” KLEAR is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish.
Apply basecoat as per manufacturer’s mixing and application instructions. Allow sufficient flash times before applying #5165. Inadequate flash time will affect the performance of the clear.
MIXING RATIO (6:1):
Mix 6 parts #5165 FLAT FINISH Klearkote to 1 part #5187 Activator.
Apply 2 even coats at 40-50 psi or (6-10 psi when using HVLP at the gun), allowing a 10-15 minute flash between coats.
NOTE:Wet coats will produce more gloss.Drier coats will produce a flat finish. Uneven coating can produce varied gloss levels in the finish.
DRY TIMES AT 77° F:
10 - 15 minutes
16 - 24 hours
Flash Time @ 77° F
Bake Time @ 140° F
Allow a one to two hour cool-down time before wet sanding or buffing after force drying.
#5165 may be recoated after a 24 Hour dry at 77° F, or upon cool down after force drying at 140° F for 30 minutes.
Pot life will be about 4-5 hours at 77°F.
Clean equipment immediately using 5 STAR #5700 Premium Lacquer Thinner or
#5685 Urethane Reducer.
6 parts #5165: 1 part #5187
17-19 seconds #2 Zahn
Volume Solids (RTS):
0.8 - 1.0 mils per full wet coat
449 sq. ft. per gallon @ 1 dry mil
see MSDS for this product
Salt Spray Resistance:
In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. For skin: Wash thoroughly with water. If difficulty in breathing is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately. See Material Safety Data Sheet.
SAFETY INFORMATION FOR INDUSTRY USE ONLY:
Danger: Vapor harmful.May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Harmful if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame. Vapors may cause flash fire.Do not smoke. Extinguish all flames and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist.Do not get in eyes, on skin or clothing.Wash thoroughly after handling.Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN.
Best Price Online
- Steedjohnd from eBay
only within the Continental US. International,
AK, HI, Next Day and 2nd Day, delivery are not available.
ABOUT SSL CERTIFICATES
Shop by Category
- Starfire Enamel Gallons
- Starfire Lacquer Gallons
- Starfire Basecoat Gallons
- Starfire Urethane Gallons
- Acme Finish 1 Gallons
Single Stage Paint Kits
- Acrylic Enamel Auto Paint Kits
- Acrylic Urethane Auto Paint Kits
- Flat Finish Auto Paint Kits
- Xtreme Urethane Auto Paint Kit
- Acme Finish 1 Kits
Two Stage Paint Kits
- Urethane Base Coat Clear Coat - TCI Clear (good)
- Urethane Base Coat Clear Coat - Starfire Clear (better)
- Urethane Base Coat Clear Coat - 5-Star Clear (best)
- Urethane Base Coat Clear Coat - Xtreme Flat