Automotive Paint and Supplies
848-448-8186
autopaint@paintforcars.com

Glamour High Solids Klearkote - 4.2 VOC

Glamour High Solids Klearkote - 4.2 VOC
    Photos are intended for general color reference only. Refer to Color Chart for actual color samples.
     


    Return To Technical Data Links

    5 STAR XTREME AUTOBODY PRODUCTS

    TECHNICAL DATA INFORMATION

    DATED: MARCH 2012

     

    PRODUCT NUMBER DESCRIPTION

    5125: GLAMOUR HS KLEARKOTE 4.2 VOC

    DESCRIPTION:

    #5125 is a high quality, high solids acrylic urethane clearcoat for spot, multi-panel or overall repairs. Formulated to be applied over basecoat systems. Excellent for custom painters. 4.2 VOC, Mix Ratio of 2:1.

    PRODUCTS:

    PART #

    PRODUCT DESCRIPTION

    SIZE

    CASE QTY

    #5125-1

    Glamour HS Klearkote

    Gallon

    4/cs

    #5125-4

    Glamour HS Klearkote

    Quart

    6/cs

    #5152-4

    Glamour Activator Spot - Fast

    Quart

    12/cs

    #5150-4

    Glamour Activator Panel - Medium

    Quart

    12/cs

    #5150-8

    Glamour Activator Panel - Medium

    Pint

    8/cs

    #5160-4

    Glamour Activator Multi-Panel/Overall - Slow

    Quart

    12/cs

    MIXING RATIO (2:1):

    2 parts of Glamour HS Clearcoat to 1 part Glamour HS Activator.

    APPLICATION:

    1.) Adjust air pressure to 45-50 psi (Siphon); 35-40 (Gravity); 8-10 (HVLP).

    2.) Apply 1 medium coat followed by 1 full wet coat.

    3.) Allow 10-15 minutes flash time between coats.

    4.) 40 minutes @ 140F for traditional baking situations.

    5.) Allow to dry overnight before exposing to the weather.

    APPLICATION:

    1.) Adjust air pressure to 45-50 psi (Siphon); 35-40 (Gravity); 8-10 (HVLP).

    2.) Apply 1 medium coat followed by 1 full wet coat.

    3.) Allow 10-15 minutes flash time between coats.

    4.) 40 minutes @ 140F for traditional baking situations.

    5.) Allow to dry overnight before exposing to the weather.

    GUN SETUPS:

    CONVENTIONAL

    #5127 Fast Activator

    Gravity Feed: 35 - 40 psi

    Siphon Feed: 45 - 50 psi

    HVLP @ Cap: 8 - 10 psi

    FLASH/DRY TIMES

    Dust Free: 15-20 Minutes

    Tack Free: 60 Minutes

    Wet Sand: 16-24 Hours

    Buffable: 16-24 Hours

    Delivery: Overnight

    CLEAN UP:

    Clean equipment immediately using 5 STAR XTREME #5700 Premium Lacquer Thinner or Urethane Reducer.

    TECH DATA:

    Color: Water White

    Mixing Ratio: 2:1

    Catalyst: #5150 Panel, #5152 Spot, #5160 Multi-Panel/Overall

    Viscosity (Sprayable): 18-20 seconds #2 Zahn

    Suggested Fluid Tip Size

    Siphon (1.3mm - 1.5mm) Gravity (1.3mm - 1.5mm) HVLP (1.3mm - 1.5mm)

    Volume Solids (Sprayable): 50%

    Film Build : 1.5 - 2.0 mils wet

    Coverage: 810 sq. ft. per gallon at 1 mil

    VOC: 4.2 lbs/gallon (RTS)

    Pot Life: 5 hours

    FIRST AID:

    In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. For skin: Wash thoroughly with water. If difficulty in breathing is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately. See Material Safety Data Sheet.

    SAFETY INFORMATION - FOR INDUSTRY USE ONLY

    Danger: Vapor and spray mist harmful.Overspray may cause lung damage. May cause allergic skin and respiratory reaction, effects may be permanent. Flammable liquid and vapor. Harmful if inhaled.May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Contents: See product label for contents and CAS #'s. The contents of this package must be blended with other components before the product can be used. Any mixture of components will have hazards of all components. Before opening the packages, read all warning labels. Follow all precautions. The material is designed for application only by professional trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public.

    KEEP OUT OF REACH OF CHILDREN.

    ABI/Autobody Brands International a division of IAMG/International Autobody Marketing Group - Scottsdale, AZ - www.autobodybrands.com

    MSDS

     

    5125: GLAMOUR HS KLEARKOTE 4.2 VOC

    PRODUCT NAME: GLAMOUR HS KLEARKOTE

    5 STAR Part Number: FS-5125-G, FS-5125-QT

    HMIS CODES: H F R P

    2*3 0 G

     

    SECTION I – MANUFACTURER IDENTIFICATION

    MANUFACTURED FOR:

    ABI/Autobody Brands International

    A division of IAMG/International Autobody Marketing Group

    ADDRESS:

    1505 North Hayden Road, Ste. 111

    Scottsdale, AZ 85257

    Web Site:

    www.autobodybrands.com

    EMERGENCY PHONE:

    (800)424-9300 (24 hrs.)

    INFORMATION PHONE:

    1-87-REFINISH

    DATE PRINTED:

    3/14/2012

    PREPARER NAME:

    MSDS Coordinator

     

    SECTION II – HAZARDOUS INGREDIENTS/SARA III INFORMATION

    REPORTABLE COMPONENTS

    CAS NUMBER

    VAPOR PRESSURE

    mm Hg @ TEMP

    WEIGHT PERCENT

    acrylic polyol / polymer / resin

    *******

     

     

    40%-50%

    n-BUTYL ACETATE

    ACGIH TLV TWA: 150 ppm

    ACGIH TLV STEL: 200 ppm

    OSHA VPEL TWA: 150 ppm

    OSHA VPEL STEL: 200 ppm

    123-86-4

    8.4

    68 F

    21.3820

    methyl n-amyl ketone

    ACGIH TLV: 50 ppm TWA

    ACGIH TLV: 233 mg/m3 TWA

    OSHA VPEL: 100 ppm TWA

    110-43-0

    2.14

    68 F

    19.6561

    * XYLENES

    ACGIH TWA 100 ppm

    ACGIH STEL 150 ppm

    OSHA TWA 100 ppm

    OSHA STEL 150 ppm

    1330-20-7

    5.10

    68 F

    8.2757

    * ETHYL BENZENE

            

    100 PPM TLV-TWA 100 PPM PEL-TWA

    5510 mg/Kg RABBIT DERMAL-LD50

    125.0000 PPM 15 MINUTES TLV-STEL

    125.0000 PPM 15 MINUTES PEL-STEL

    3500 mg/Kg RAT ORAL-LD50

    100-41-4

    7.10

    68 F

    1.95

    2-(2-hydroxy-3,5-di-(tert)-amylphenyl)benzotriazole

    25973-55-1

    N/A

     

    0%-10%

    * Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.

    N/A

     

    SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

    BOILING RANGE: 252 F - 300 F

    SPECIFIC GRAVITY (H2O=1): .97

    VAPOR DENSITY: Heavier than air

    EVAPORATION RATE: Slower than ether

    V.O.C. grams/liter: 514.12

    V.O.C. lbs./gal.: 4.29

    SOLUBILITY IN WATER: Insoluble

    SOLIDS BY VOLUME: 39.853

    APPEARANCE AND ODOR: Clear liquid with organic solvent odor

     

    SECTION IV – FIRE AND EXPLOSION HAZARD DATA

    FLASH POINT: 78 F

    METHOD USED: TAGCC

    FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 1.0

    UPPER: 15.0

    EXTINGUISHING MEDIA: Foam, Carbon Dioxide, Dry Chemical, Water Fog

    SPECIAL FIREFIGHTING PROCEDURES

    Full protective equipment, including self contained breathing apparatus, is recommended. Water from fog nozzles may be used to cool closed containers to prevent pressure build up.

    UNUSUAL FIRE AND EXPLOSION HAZARDS

    When heated above flashpoint, emits flammable vapors which, when mixed with air, can burn or become explosive. Fine mists or sprays may be flammable below the flash point.

     

    SECTION V – REACTIVITY DATA

    STABILITY: Stable

    CONDITIONS TO AVOID

    Avoid all sources of ignition

    INCOMPATIBILITY (MATERIALS TO AVOID)

    Strong oxidizing materials

    HAZARDOUS DECOMPOSITION OR BYPRODUCTS

    May produce hazardous fumes when heated to decomposition. Fumes may contain Carbon Monoxide and Carbon Dioxide.

    HAZARDOUS POLYMERIZATION: Will not occur

     

    SECTION VI - HEALTH HAZARD DATA

    INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

    May cause nose and throat irritation. Repeated and prolonged exposure to organic solvents may lead to permanent brain and nervous system damage. Eye watering, headaches, nausea, dizziness, and loss of coordination are signs that solvent levels are too high.

    Individuals with breathing problems must not be exposed to this product. If affected by inhalation, remove to fresh air. If breathing difficulty persists, consult a physician.

    SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE

    May cause irritation or burning of the eyes. Repeated and prolonged skin contact may cause skin irritation or dermatitis. In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes; call a physician. In case of skin contact, wash with soap and water. If irritation occurs, contact a physician.

    INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

    Gastrointestinal distress. In the unlikely event of ingestion, call a physician immediately and have the names of all ingredients available.

    HEALTH HAZARDS (ACUTE AND CHRONIC)

    ACUTE- Dizziness, irritation of the respiratory tract, weakness, nausea, or possible narcosis or even asphyxiation. May be accompanied by coughing or labored breathing.

    CHRONIC- Reports have linked organic solvents with brain and nervous system damage. Misuse of this product by deliberately concentrating and inhaling the contents may be harmful or fatal.

    CARCINOGENICITY:

    NTP CARCINOGEN: No

    IARC MONOGRAPHS: No

    PROPOSITION 65 STATEMENT: WARNING! This product contains a chemical or chemicals known to the state of California to cause cancer and/or birth defects or other reproductive harm.

    OSHA REGULATED: Yes

    MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE

    Do not use this product if you have chronic lung or breathing problems.

    EMERGENCY AND FIRST AID PROCEDURES

    If ingestion, or any type of overexposure or symptoms of overexposure occur during the use of this product, contact a poison control center, emergency room or physician immediately; have material safety data sheet available.

     

    SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

    STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED

    Remove all sources of ignition (sparks, flames, and hot surfaces). Avoid breathing vapors. Ventilate area. Remove with an inert absorbent and non-sparking tools.

    WASTE DISPOSAL METHOD

    Dispose in accordance with state, federal and local regulations. Do not incinerate closed containers.

    PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING

    Keep containers tightly closed in a cool, dry, well ventilated area away from all possible ignition sources. Store large quanties of material in buildings designed for the storage of flammable liquids.

    OTHER PRECAUTIONS

    Employees should be trained in safety measures that should be taken when using this product.

     

    SECTION VIII - CONTROL MEASURES

    RESPIRATORY PROTECTION

    Avoid breathing vapors or spray mist. Wear a properly fitted respirator approved by NIOSH/MSHA (TC-23c) for use with paints during application and until all vapors are exhausted. In confined areas, or where continuous spray operations are typical, or proper respirator fit is not possible, wear a positive-pressure supplied air respirator (TC-19c). In all cases follow respirator manufactures directions for respirator use. Do not allow anyone without protection into the painting area.

    VENTILATION

    Provide sufficient ventilation to keep contaminates below applicable OSHA requirements.

    PROTECTIVE GLOVES

    Neoprene gloves impervious to organic solvents are recommended.

    EYE PROTECTION

    Use safety eyewear designed to protect against liquid splash.

    OTHER PROTECTIVE CLOTHING OR EQUIPMENT

    Impervious coveralls are recommended.

    WORK/HYGIENIC PRACTICES

    Eye wash and safety showers in the work place are recommended. Wash hands before eating and smoking.

     

    SECTION IX - DISCLAIMER

    The information contained in this material safety data sheet is information from our suppliers and other sources. It is believed to be reliable. This data is not to be taken as a warranty or representation for which this company assumes legal responsibility.

     

     

    Best Price Online

    $169.00
    Select Size:

    Shipping/Return Policy
    Contact Us

    "PaintForCars ships quick and delivers what they advertise."
    - Steedjohnd from eBay
    Flammable products can only ship by ground, and
    only within the Continental US. International,
    AK, HI, Next Day and 2nd Day, delivery are not available.

    Related Products

     
    MAXX SOLV Wax & Grease Remover
    Gerson Blue Resperator


     


    © 1998-2013 PaintForCars.com