Automotive Paint and Supplies
848-448-8186
autopaint@paintforcars.com

Acme Finish 1 Wine Red Kit

Acme Finish 1 Wine Red Kit
    Photos are intended for general color reference only. Refer to Color Chart for actual color samples.
     
    Acme Finish 1™

    Technical Data Sheet Technical Data Sheet

    Mixing
    4 Finish 1 3.5 Color + 1 Hardener

    Harden Temperature Range
    FH611: 60 F - 70 F (air dry only)
    FH612: 65 F - 85 F
    FH613: 80 F and above

    Application
    Apply 2 medium wet coats or until uniform color is achieved
    Allow each coat to flash until handslick
    Adjust air pressure to 10 psi HVLP
    Adjust air pressure to 40-45 psi conventional gravity feed

    Drying Schedule
    Air Dry:
    Out of Dust – 30 minutes @ 70° F
    To Deliver – Overnight

    Force Dry:
    30 minutes at 120° F surface temperature
    Buffing Times*:

    Air Dry – After 24 hours
    Force Dry – 30 minutes after cool down


    *Buffing of Metallic Colors may cause streaking. Only a light polishing of metallic colors is recommended.

    Click here to view and print directions

    http://www.sherwin-automotive.com/wcm/idc/groups/public/@swpublic/@sherwin-williams-automotive/@content/documents/webcontent/mdaw/mde2/~edisp/swaf-applicationguide.pdf
     
     


    © 1998-2013 PaintForCars.com